Hebei General Metal Netting Co.,Ltd.

High Tensile Wire Mesh for Screen Printing

Stainless Steel Wire Clothes for Screen Printing has high open area mesh opening. With high viscosity paste at low printing pressures is possible. This kind of screen printing mesh uses a wire which has 3 times higher tensile strength compared to standard stainless steel wire mesh and an extremely low elongation rate of 3～5％, with open area ratios exceeding 60％. Ultra-thin wire diameter and high open area ratio provide exceptional paste releasing capabilities, making it possible to print with high viscosity paste with low printing pressure. This product shows extraordinary performance in printing that requires fine patterns and dimensional accuracy. Ultra-thin stainless steel wire mesh is used to apply phosphors on Plasma Display Panel (PDP), and most recently, it is also drawing attention for sieving applications.

Stainless Steel Wire Mesh for Screen printing is widely used in electronics industry due to its ability to produce precise thin and thick layers from various paste-like materials including conductive, resistive, dieletric or organic layers. Stainless Steel Wire Mesh for Screen printing materials can processes to create more electronic functions on the substrates, not only conductors but also dielectrics, capacitors, resistors, coils, antennas, diodes, transistors, electroluminescence devices, bio sensors and more as the embedded components in the multilayer circuits.

Screen Applications:
• Thick Film Micro-Electronics
• Hybrid Circuits
• Solar / Photovoltaic Applications
• MCM's
• Ultra-fine Lines
• Microelectronic Packaging
• Low Temperature Co-fired Ceramics
• Diffusion Patterning Process
• Solder Paste & Adhesives
• Membrane Switches
• Electronic Display Systems
• Printed Circuits

Mesh Opening W mm	Wire Diameter d mm	Number of meshes per inch (n)	Open Area Ao %	Mesh Thickness Average　Min-Max D　　　　D um　　　um	Material Grade
0.104	0.050	165	46	99 105	T316L
0.109	0.045	165	50	92　98	T316L
0.096	0.045	180	46	95 111	T316L
0.087	0.040	200	47	79　85	T316L
0.075	0.035	230	47	72　78	T316L
0.082	0.028	230	56	53　59	T316L
0.062	0.040	250	37	87　93	T316L
0.067	0.035	250	43	76　80	T316L
0.072	0.030	250	50	62　58	T316L
0.059	0.028	250	52	54　58	T316L
0.059	0.035	270	39	75　79	T316L
0.061	0.030	280	45	62　66	T316L
0.055	0.030	300	42	66　70	T316L
0.048	0.030	325	38	60　64	T316L
0.050	0.028	325	41	60　64	T316L
0.055	0.023	325	50	49　53	T316L
0.041	0.025	400	37	57　49	T316L
0.046	0.023	400	41	53　57	T316L
0.046	0.019	400	51	37　41	T316L
0.033	0.018	500	48	37　41	T316L